Electrical Connection - Delfin D/G 1 Z22 Operating And Maintenance Manual

4.2
D/G 1 – D/G 2 Z22

Electrical connection

Ensure that. power supply meets the voltage and frequency specifications as indicated on the
vacuum's marking plate and control panel.
Caution!
Do not plug the vacuum's tap with wet hands.
In case it is necessary to use an extension, check that the extension is in perfect conditions,
CE marked and that the cable's cross section area is suitable for the vacuum's electrical input.
If, after turning on the vacuum, the hose blows air instead of vacuuming, it is necessary to disconnect the
vacuum, unplug it and invert the vacuum's engine rotation direction using a screw driver to work on the
vacuum's tap as shown in the picture
.
Edition: September 2005 – Rel. 00