3.2
Unpacking and handling
Remove the carton protective package and unlock the vacuum removing the securing straps.
WARNING!
Before proceeding with installation it is necessary to visually inspect the vacuum first, checking
for any damages which may have occurred during transportation.
In case damages or faults are detected on one or more components, it will be necessary to suspend
installation and notify the manufacturer about the failure. Remedy and actions to be taken shall be
agreed with the manufacturer.
The vacuum filter is already placed inside the machine.
Shift the vacuum using the handle, as shown in the picture below.
CAUTION!
The vacuum can be shifted manually on flat grounds only.
The vacuum's heavy weight may not allow the operator to shift it safely on slopes as it would be difficult
to handle and control the machine avoiding dangerous collision which may cause damages and injury.
D/G 1 – D/G 2 Z22
Edition: September 2005 – Rel. 00