Table of Contents
Advertisement
1.6
Applications and use
This particular model has been designed, constructed and equipped with safety devices for solid dust
and debris' vacuuming applications only. The machine is provided with appropriate specific anti-static
filters
94/9/C Directive).
CAUTION!
Always use the specific anti-static filters prescribed for the type of dust and/or debris to be
vacuumed.
This vacuum has been designed for industrial professional use.
Any other different use is IMPROPER.
Environmental conditions
1.7
To ensure correct working and efficiency, the vacuum must be sheltered from atmospheric agents (such
as rain, hail, snow, fog, dust particles in the air and so on) in an environment with ambient temperature
between 5° C and 45° C and Relative Humidity not exceeding 70%. The workplace must be clean and
reasonably enlightened.
1.8
Noise level
Noise tests have been performed in compliance with the UNI 7712 Standard. The phonometric test
results on this specific model correspond to the following acoustic pressure
CAUTION!
Complying with the articles of the Italian Law Decree 277/91, all workers exposed to noise
pressure exceeding 85 dBA must protect themselves wearing their personal safety devices.
As such, if the vacuum has to be operated in the above specified conditions, the employer
must provide the staff with the homologated acoustic devices prescribed for their personal
safety and also inform the operators about the risks arising from their exposure to noise.
1.9
Storage
Remove the filter and clean it, empty the collection container and store the vacuum in a suitable place,
sheltered from atmospheric agents and ambient temperature between 0° C and 40° C. Cover the vacuum
with a nylon sheet in order to preserve it from dust deposit.
1 .10
Waste disposal
Any vacuum/vacuum component's waste disposal must be executed applying to authorized waste
disposal agencies complying with the applicable law and regulations in force. Before proceeding
with waste disposal it is necessary to separate plastic or rubber parts from the electrical
components.
The parts made out of plastic material, aluminium or steel can be recycled if collected separately
and delivered to waste & recycling providers.
D/G 1 – D/G 2 Z22
to operate in explosive atmosphere areas (Z22 CLASSIFICATION AREA, according ATEX
.
.
78 dB (A) I
.
.
Edition: September 2005 – Rel. 00
values:
.
Advertisement
Table of Contents
