11. Install the transmission switch, washer and snap
ring.
12. Install the detent plug and torque to specification.
TORQUE
Detent Plug:
20 ft. lbs (27 Nm)
13. Assemble the input shaft and reverse shaft with the
lower shift fork and park pawl installed.
14. Place the assembly into the transmission housing
making sure to move the park pawl arm behind the
shift shaft cam during installation.
15. Lift up on the lower shift fork and rotate the end into
the cam.
16. Install the upper shift fork and rotate the end into the
cam.
TRANSMISSION
6
6.15