Seat SOUND SYSTEM 1.0 Owner's Manual page 28

Adjusting the output volume
If you need to increase the output volume for the external audio source, first
lower the base volume on the radio system ⇒ page 11.
If the sound from the external audio source is too quiet, if possible, increase
the output volume on the external audio source. If this is not sufficient, set
the input volume (AUX VOL LEVEL) in the settings to level 2 or level 3
⇒ page 29.
If the sound from the connected external audio source is too loud or
distorted, if possible, lower the output volume on the external audio source.
If this is not sufficient, set AUX VOL LEVEL to level 2 or level 1.
Information on operating an external audio source connected to the AUX-IN
multimedia socket
Function
Selection of another audio source on
the radio system.
Stopping playback on the external
audio source or disconnecting the
plug from the AUX-IN multimedia
socket.
Note
•
Interference noise may be heard if the external audio source is powered
from the vehicle's 12-volt socket.
•
Please read and observe the external audio source manufacturer oper-
ating manual.
Result
The external audio source continues
to run in the background.
The radio system remains in the AUX
menu.
Audio mode 27