Seat SOUND SYSTEM 1.0 Owner's Manual page 17

16 Audio mode
Storing stations to station buttons
When storing a station to a station button, any station already stored to the
same station button in the same memory level will be overwritten.
Assigning individual station buttons manually
•
Select the frequency band and memory level
•
Select a station.
•
Press and hold the chosen station button until you hear a tone.
•
The station currently playing (RADIO 1) will then be stored to that station
button.
The station button to which the station currently playing is assigned is
displayed underlined on the screen
Fig. 9 Station stored to
station button 2 in the
FM1 memory level.
Fig. 10 MENU display
with additional functions
in Radio mode: Scan func-
tion (SCN), Autostore (AS)
and Setup (SET).
(fig. 9: FM1).
fig. 9.
Storing stations automatically with Autostore (AS)
The Autostore function automatically stores the stations with the strongest
reception at the current moment to the six station buttons in the currently
selected memory level.
•
Select the frequency band and memory level.
•
Press the MENU unit button to open the additional functions
•
Press and hold the AS function button until STORE appears.
•
This procedure can take some seconds. When the stations have been
stored, STORE disappears from the display.
Selecting stored stations
•
Select the frequency band and memory level in which the desired station
is stored (fig. 9: FM1).
•
Briefly press the station button to which the desired station is stored.
•
Alternatively: Depending on the settings (SEEK MODE), you can browse
through the stored stations with the arrow buttons
It is only possible to play a stored station if it can be received at your current
location.
⇒ fig.
10.
Fig. 11 Radio mode
display: changing
stations with the arrow
buttons with selection of
stored stations only.
⇒ page 29.
and