22
Audio mode
Inserting a CD
•
Hold the CD with the printed side facing up.
•
Push the CD into the CD slot
it is drawn in automatically.
•
When the CD is inserted, the play function will start automatically.
When other functions are selected, CD-IN is displayed at the top left of the
screen if a CD is inserted in the internal CD drive.
Ejecting a CD
•
Press the
unit button.
EJECT
•
The CD in the drive will be ejected and must be removed within
10 seconds.
If the CD is not removed within 10 seconds, it is retracted again for safety
reasons.
Error messages on the screen
A reading error is indicated by ERROR in the title bar.
An error message in the bottom line of the screen indicates the possible
cause of the error.
⇒ page 8, fig. 1
A
only to the point where
4
Message
Meaning and consequences
NO CD
No compatible data medium.
It is not possible to switch to Media mode.
CD ROM
Data CD inserted.
CD will be ejected.
CHECK CD
The inserted CD cannot be read.
CD will be ejected.
Check for damage.
TEMPERATURE
CD drive is too hot.
CD playback is disabled.
Another audio source will be played.
SERVICE
Mechanical fault in the CD drive.
Contact a qualified workshop.
Note
Uneven road surfaces and strong vibrations may cause the CD to jump.
Selecting a media source
Fig. 18 Media selection
menu: CD being played
from the internal CD drive.
Need help?
Do you have a question about the SOUND SYSTEM 1.0 and is the answer not in the manual?
Questions and answers