Seat SOUND SYSTEM 1.0 Owner's Manual page 14

RDS (Radio Data System)
If a station is RDS-compatible and reception is good, its station name can be
displayed instead of its frequency (in
The RDS function allows "automatic station tracking". This means that the
unit always switches to the frequency that offers the best reception of the
current radio station as the vehicle travels from one area to the next. If the
reception is poor, the unit may be muted for a short time as it searches for
alternative frequencies.
Changing frequency band
The currently selected frequency band (FM or AM) is indicated above the
station display.
•
In Radio mode, briefly press the
buttons FM1 , FM2 , AM1 and AM2
•
Press one of the FM or AM function buttons to switch to the FM or AM
⇒ page 12, fig.
frequency band 2.
•
Alternatively: Briefly press the
MEDIA
switch between the function buttons at the bottom of the screen.
page 12, fig. 2: Radio 1).
RADIO unit button to display the function
⇒ page 12, fig.
2.
unit button as often as required to
Changing stations
Depending on the setting selected for the search mode (SEEK MODE), the
unit either switches between all available stations or stored stations only
(SETUP see page 29).
•
Briefly press an arrow button
Audio mode
Fig. 4 Changing stations
with the arrow buttons to
the next available station.
Fig. 5 Changing stations
with the arrow buttons
with selection of stored
stations only.
or .
13