Table of Contents
Advertisement
SP and VT Models
TF Models
859.0302
TO Models
Rounded side faces diaphragm
Apply lithium based grease.
Apply primer and medium-strength (blue) thread
locker. Torque to 136–142 N•m (100-105 ft-lb).
AIR SIDE markings on diaphragm must face
center housing.
If screw comes loose or is replaced, apply
permanent (red) thread locker to diaphragm side
threads. Apply primer and medium-strength (blue)
thread locker to shaft side threads.
Lips must face out of housing.
Cartridges (109) must be installed before pilot
valves (111).
Torque to 2-3 N•m (20-25 in.-lb).
Repair
17
Advertisement
Table of Contents
