Paper Feed Problems - Sharp MX-B467P User Manual

Troubleshooting
All life indicators are designed to function with supplies and parts from the printer manufacturer and may
deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond
the intended life may damage your printer or associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage.
Damage caused by the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, from the control panel, press and hold X and
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine supply or part from the printer manufacturer.

Paper feed problems

Envelope seals when printing
Action
Step 1
a
Use an envelope that has been stored in a dry environment.
Note: Printing on envelopes with high moisture content can
seal the flaps.
b
Send the print job.
Does the envelope seal when printing?
Step 2
a
Make sure that paper type is set to Envelope.
From the control panel, navigate to:
Settings >
Paper Size/Type >
b
Send the print job.
Does the envelope seal when printing?
> Paper > > Tray Configuration >
simultaneously for 15 seconds.
Yes
Go to step 2.
Contact your dealer. The problem is
>
90
No
The problem is
solved.
solved.