Sharp MX-B467P User Manual page 40

Understanding the printer menus
Menu item
Banner Page
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Menu item
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
•
Network Name
•
Network Mode
Infrastructure
•
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Enable Wi‑Fi Direct
On
Off*
Compatibility
802.11b/g/n (2.4GHz)*
Wireless Security Mode
Disabled*
WEP
WPA2/WPA-Personal
WPA2-Personal
802.1x - RADIUS
WEP Authentication Mode
Auto*
Open
Shared
Description
Print a banner page.
Description
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Set the printer to connect directly to Wi-Fi devices.
Specify the wireless standard for the wireless network.
Set the type of security for connecting the printer to wireless devices.
Set the type of Wireless Encryption Protocol (WEP) used by the
printer.
Note: This menu item appears only if Wireless Security Mode is set
to WEP.
40