Sharp MX-B467P User Manual page 49

Understanding the printer menus
HTTP/FTP Settings
Menu item
Enable HTTP Server
Off
On*
Enable HTTPS
Off
On*
Force HTTPS Connections
On
Off*
Enable FTP/TFTP
Off
On*
Local Domains
HTTP Proxy IP Address
FTP Proxy IP Address
HTTP Default IP Port
1–65535 (80*)
HTTPS Device Certificate
FTP Default IP Port
1–65535 (21*)
Timeout for HTTP/FTP
Requests
1–299 (30*)
Retries for HTTP/FTP Requests
1–299 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item
PCL SmartSwitch
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Access the Embedded Web Server to monitor and manage the printer.
Configure the Hypertext Transfer Protocol Secure (HTTPS) settings.
Force the printer to use the HTTPS connections.
Send files using FTP.
Specify domain names for HTTP and FTP servers.
Note: This menu item appears only in the Embedded Web Server.
Configure the HTTP and FTP server settings.
Note: HTTP Proxy IP Address and FTP Proxy IP Address appear only in the
Embedded Web Server.
Specify the amount of time before the server connection stops.
Set the number of retries to connect to the HTTP/FTP server.
Description
Set the printer to switch to PCL emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
49