Advertisement
3.
Remove the three (3) parts as
shown. Keep all parts for reassembly.
4.
Remove two (2) shoulder bolts
using a T25 drive bit. Remove two (2)
wave washers as shown. These parts
will be replaced, so you can throw
these shoulder bolts and wave
washers away.
5.
Remove swing arm link 'A' and
swing arm link 'B' as shown. These
parts will be replaced, so you can
throw these swing arm links away.
3
4
OLD SHOULDER SCREWS
(WITHOUT LOCTITE)
OLD WAVE WASHERS
5
SWING ARM LINKS
Page 3 of 6
939546224 Rev B
Advertisement
