Cooling Fan/Flywheel Removal; Installation - Honda GX270H Manual

62Z7B000.book 5 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead

COOLING FAN/FLYWHEEL REMOVAL/

INSTALLATION

REMOVAL
Remove the following parts:
– Fan cover (page 5-2).
– Ignition coil (page 9-4).
SPECIAL WOODRUFF KEY
(25 x 18 mm)
FLYWHEEL
REMOVAL:
Hold the flywheel [1] with a commercially available strap wrench
[2] and use the special tool to remove the flywheel.
Do not hit the flywheel with a hammer.
TOOL:
FLYWHEEL PULLER SET [3] 07935-805004
[2]
FLYWHEEL
(Without starter)
COOLING FAN
[3]
[1]
CHARGING SYSTEM
FLYWHEEL
(With starter)
STARTER PULLEY
(With screen)
STARTER PULLEY
(Without screen)
SPECIAL NUT (16 mm)
REMOVAL:
Hold the flywheel [1] with a commercially available
strap wrench [2] and remove the special nut (16
mm) [3].
Take care not to damage the cooling fan.
[2]
[1]
[3]
8-5