Honda GX270H Manual page 111

62Z7B000.book 6 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
STARTING SYSTEM
Apply 1 – 2 g (0.04 – 0.07 oz) of grease to the shaft [1]
of the case, and 1 – 2 g (0.04 – 0.07 oz) to the reel
sliding surface [2]
Install the reel [3] into the case by aligning the inner
hook [4] of the spring with the boss [5] of the case as
shown.
Apply grease to the sliding surface of the ratchets [1].
Install the return springs [2] and ratchets into the reel as
shown.
Install the friction spring [1] so that the end gap [2] is
positioned 90° from the cutout [3] in the ratchet guide
[4].
Install the ratchet guide [1] onto the reel.
Install the setting screw [2] and tighten it to the specified
torque while holding the ratchet guide.
TORQUE: 5.4 N·m (0.6 kgf·m, 4.0 lbf·ft)
10-6
[3]
[1]
[2]
[2] [1]
[1]
[2]
[1]
[2]
90°
[4]
[5]
[2]
[4]
[3]
[2]
[1]