Reduction Unit Disassembly; Assembly - Honda GX270H Manual

62Z7B000.book 8 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
CRANKCASE

REDUCTION UNIT DISASSEMBLY/

ASSEMBLY

Remove the recoil starter (page 10-3).
Drain the oil (page 3-3).
After installation, fill the oil (page 3-3).
1/2 REDUCTION CHAIN TYPE (GX270H
ONLY)
P.T.O. DRIVE CHAIN
INSPECTION: (page 14-21)
ASSEMBLY:
Attach the P.T.O. drive chain to the P.T.O.
shaft and sprocket, and install in the
crankcase cover as a set.
WASHER (8 mm)
BOLT (8 x 25 mm)
24 N·m (2.4 kgf·m, 18 lbf·ft)
CHAIN CASE COVER PACKING
OIL SEAL (30 x 46 x 8 mm)
14-8
DRIVE SPROCKET
(Gear teeth)
INSPECTION: (page 14-21)
KEY
(7 x 7 x 33 mm)
BEARING (6206)
CHAIN CASE COVER
ASSEMBLY:
Be careful not to damage the oil seal lips.
BOLT (8 x 40 mm) (6)
DOWEL PIN (2)
P.T.O. SHAFT
(Gear teeth and journal)
INSPECTION: (page 14-21)