Configuring Cre/Rpe For Use With Global Payments Emv - Ingenico Desk/5000 Manual

Configuring CRE/RPE for use with Global Payments EMV

You can configure CRE to communicate to the Pin Pad by following the step below.
1. Select the Manager or Options button.
2. Enter the administrator password
(default: admin) where applicable.
3. Select Setup(4) then, Setup Screen(G)
4. At the setup screen select the Payment
Processing tab
5. Select the Processing Tab
6. Select Credit/Debit
7. Select Global Payments Canada as the
Payment Processor from the dropdown
menu
8. Select TCP/IP under the Communication
Type section
9. Enter the IP Address being used by the
pinpad from the print out.
Desk/5000
10. Verify that Port No. is set to the #
entered in Step 7 when steeping up
communications.
11. Press Update
20 | P a g e