Table of Contents
Advertisement
NOVA LBS Load Break Switch
MN008006EN Manual
Efective March 2021
Figure 17. System Configuration Screen of the LBS control.
ACCESSORIES
Terminals
The standard terminal is an eyebolt, 1/0—500 mcm (630A). Eyebolt,
4/0—1000 mcm (800 A), 2-hole and 4-hole flat- pad terminals, and stud-
type terminals are available as an accessory (Table 4).
The eyebolt, flat-pad, and stud terminals are made of copper alloys.
Eaton recommends terminal connection to copper wires to optimize the
electrical connection. Aluminum cables may produce aluminum oxide
sufficient to compromise the electrical connections.
Anti-oxide coatings for temporary protection of wirebrushed, aluminum
cable connections to flat-pad or stud terminals must be maintained at
intervals determined by the customer based on load current, climate,
and other installation conditions.
Eyebolt terminals are recommended for copper conductors only.
17
www.eaton.com/cooperpowerseries
Advertisement
Table of Contents
