Connecting High Ac/Dc Power - Siemens SIMATIC NET RUGGEDCOM RX1536 Installation Manual

Installing the Device
2.5.1 Connecting High AC/DC Power
2.5.1

Connecting High AC/DC Power

To connect a high AC/DC power supply to the device, do the following:
Electrocution hazard – risk of death, serious personal injury and/or damage to
the device
Make sure the supplied cover is always installed over high voltage screw terminal
blocks.
Electrical hazard – risk of damage to equipment
Do not connect AC power cables to a 12, 24 or 48 VDC power supply terminal block.
Damage to the power supply may occur.
12
DANGER
NOTICE
RUGGEDCOM RX1536
Installation Manual, 04/2021, C79000-G8976-1488-02