Direct Access Socket Panel; Phones; S-Vhs; Link - Bang & Olufsen BeoVision 5 User Manual

The socket is also used for BeoLink
distribution of sound and picture throughout
the house. In addition, the socket can be used
for an external positioner box (used in a
Satellite dish setup).

LINK

Aerial output socket for distribution of video
signals to other rooms.
VHF/UHF
Aerial input socket for your external aerial or
cable TV network.
ATTN. ON/OFF
Aerial signal attenuator. Options are:
OFF: Normal setting
ON: Signals damped
IR OUTPUT
For connection of a set-top box.
*NOTE! You may connect the set-top box to
either the DECODER, AV or V.TAPE socket. Which
socket to choose depends on the other
equipment you have connected.

Direct access socket panel

PHONES

You can connect stereo headphones to the
socket marked PHONES. The BeoVision 5
speakers can then be cut out by pressing the
middle of the Beo4 volume button.
L – R – VIDEO
These sockets are for connection of a video
camera:
L – R: For audio connection (left and right
sound channel respectively).
VIDEO: For the video signal.

S-VHS

For the connection of S-VHS or Hi-8
Camcorder only.
PHONES L R VIDEO S–VHS
29