Watch Camcorder On Beovision 5; Copy From A Camcorder - Bang & Olufsen BeoVision 5 User Manual

You can connect a Camcorder and
watch your recordings or home
movies on the BeoVision 5. If you
have connected e.g. a BeoCord
V 8000 video tape recorder to your
BeoVision 5, you can copy
Camcorder recordings onto a
videotape.
Watch and copy Camcorder recordings

Watch Camcorder on BeoVision 5

To watch your Camcorder recordings, connect
the Camcorder and switch the BeoVision 5 on.
When you start playback on your camera, the
BeoVision 5 automatically registers the signal
and you can see the pictures from the
Camcorder on the screen.
To watch Camcorder recordings...
Connect your Camcorder and
start playback on the Camcorder
TV Press to switch on BeoVision 5 –
the Camcorder signal appears
automatically
If the signal from the Camcorder gets
switched off accidentally...
LIST Press until CAMCORD* is shown
CAMCORD in the Beo4 display and press GO
GO
*In order to display CAMCORD in the Beo4
display, you must first add it to the Beo4 list of
functions. Refer to the Beo4's own Guide for
further information.

Copy from a Camcorder

When you connect your Camcorder to the
direct access socket panel, you can copy
Camcorder recordings onto a videotape. While
the tape is being copied, you can watch a TV
programme or switch BeoVision 5 to standby.
To copy a recording from a Camcorder...
Connect your Camcorder and
start playback on the Camcorder
RECORD Press to prepare BeoCord V 8000
for recording
Press again to start recording
RECORD
V TAPE Press V TAPE and then STOP to
STOP pause a recording
GO Press to resume a paused
recording, or...
STOP ...press STOP again to stop a
recording entirely
19