Activate The Pin-Code System; Change Or Delete Your Pin-Code - Bang & Olufsen BeoVision 5 User Manual

42
You can protect your BeoVision 5 by
entering a four-digit PIN (Personal
Identification Number) code. Should
your BeoVision 5 be disconnected
from the mains for more than
approximately 30 minutes, only those
who know your PIN-code can gain
access to your BeoVision 5.
To activate the PIN-code system, to
change your code or to delete it
altogether, you must call up the PIN-
code setup menu.
If you should lose or forget your
code, contact your Bang & Olufsen
retailer for a Master code that
disables your PIN-code and gives you
access to your BeoVision 5.
NOTE! You can change your PIN-code up to five
times in a three-hour period.
The PIN-code system

Activate the PIN-code system

Menu
1 Timer play
3 TV list
4 SAT list
5 Setup
Pincode Confirm pincode
----
-- --
MENU Press to call up the main menu
ss ss ss
Press twice, followed by STOP.
STOP The Pincode menu appears on
the screen
0 – 9 Use the number keys on Beo4 to
enter the four digits of your code
STOP To cancel code entry, press STOP
and the input fields are cleared
tt
When you have entered your
code once, press
cursor to Confirm pincode
0 – 9 Re-enter the code a second time
GO When you have entered the
correct code twice, press GO.
TV 1
The BeoVision 5 on-screen
PIN _ _ _ _
N display then shows the current
source. If the two codes do not
match, the input fields are
cleared and you must enter the
code again

Change or delete your PIN-code

Pincode
1 Delete code
2 New code
New pincode Confirm pincode
----
MENU
ss ss
STOP
PIN _ _ _ _
0 – 9
PIN * * _ _
STOP
tt
to move the
PIN _ _ _ _
1
2
0 – 9
tt
GO
- - - -
Press to call up the main menu
ss
Press twice, followed by STOP.
The BeoVision 5 on-screen
display prompts you for your
PIN-code
Use the number keys on Beo4 to
enter your PIN-code
To cancel code entry, press STOP
and the input fields are cleared
If the code does not match, the
input fields are cleared and you
must enter the code again
When you have entered your
code, the Pincode setup menu
prompts you to delete your code
or enter a new code
Press 1 to delete your code, or 2
to enter a new code
To enter a new code, use the
number keys on Beo4
When you have entered your
tt
code once, press to move the
cursor to Confirm pincode and
re-enter the code
Press GO to store the new code