Picture Within A Picture; The Picture-In-Picture Function; See Two Sources At The Same Time - Bang & Olufsen BeoVision 5 User Manual

The Picture-in-Picture function

enables you to see two video sources
on-screen simultaneously. While you
are watching a programme or
recording, you can prompt your
BeoVision 5 to insert a small picture
on the screen showing the source
and channel number of your choice.
For example, you can view a TV and
a set-top box programme or a
videotape playback and a TV
programme at the same time,
provided that these sources are
available in your system.

See two sources at the same time

Picture within a picture

When the Picture-in-Picture function is
activated, operation with the Beo4 remote
control is directed at the small picture, but the
sound always follows the source shown on the
whole television screen.
While watching e.g. TV...
LIST Press repeatedly until P-IN-P* is
shown in the Beo4 display
P-IN-P
Press e.g. SAT to select a source
SAT
to view in the window
0 Press 0 to swap the large and
small picture
LIST Press repeatedly until P-IN-P is
shown in the Beo4 display – then
P-IN-P
press the coloured button
corresponding to a corner of the
screen to place the window on
the screen
TV Press a source button, such as
TV, to cancel Picture-in-Picture
and return to normal viewing
If P-IN-P is not available on the Beo4 display, you
must add it to the Beo4 list of functions. Refer to
Beo4's own Guide for further information.
*Note: To view a source registered in the
'Connections' menu as V.AUX, such as a set-top
box, press LIST repeatedly until P-V.AUX is shown
in the Beo4 display instead.
15