What Is Connected? - Bang & Olufsen BeoVision 5 User Manual

26
If you connect additional video
sources or equipment to your
BeoVision 5, then you must register
the equipment in the Connections
menu.
The settings you select in the
Connections menu tell the
BeoVision 5 what is connected.
For information about where and
how to connect extra equipment,
refer to the chapters Connect
additional equipment on page 24 as
well as Socket panels on page 28.
Register additional video equipment

What is connected?

Registering the equipment connected to
BeoVision 5 enables you to activate it with the
Beo4 remote control.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
V. Tape AV
V. Tape DVD
> Press MENU to call up the main menu.
> Press 3 to call up the Setup menu.
> Press 4 to call up the Connections menu (5 if a
motorised stand is installed).
tt
> Press to select a socket.
> Press or
▲ ▼
available equipment types until you find what
you have connected. Select None if nothing is
connected.
> When you have selected your equipment types,
press GO to store your settings or press EXIT to
Decoder
leave all menus without storing.
Decoder
to step through the list of