Picture format
Your television always ensures you the best
possible picture. It automatically adapts the
picture so that it fills out as much of the
screen as possible. However, you can always
choose the format you prefer. When you
select a format yourself, the automatic format
selection is deactivated, until you switch to a
different channel or change source.
> Press to bring up the Scene display on Beo5,
then press Picture to bring up the Picture display
on Beo5. (Beo4: Press LIST repeatedly to display
FORMAT).
> Press Optimise if you want to optimise the
picture, or press the name of the desired picture
format, for example Standard. (Beo4: Press GO
or 1 – 3).
If you have chosen Standard ...
> Press Variation to switch between variations of
this format. (Beo4: Press or ).
If you have chosen Standard or Zoom ...
> Press or on the Beo5 display to move the
picture up and down. (Beo4: Press or ).
> Press
to leave the Picture function. (Beo4:
Press EXIT).
Picture formats to choose from
Standard (Beo4: FORMAT 1) ... For standard TV
pictures. Two variations are available: Panoramic
view (for the largest picture) and 4:.
Zoom (Beo4: FORMAT 2) ... For Zoom pictures.
When you select Zoom, the picture is
automatically adjusted vertically. This ensures
that channel names or subtitles – if these appear
in the broadcasted picture – can be seen.
Wide (Beo4: FORMAT ) ... For genuine 1:
wide-screen pictures.
Switch to Home cinema
If a projector is connected, you can use your
remote control and move the picture from
the television screen onto a projector screen
for a special occasion or movie.
> Press to bring up the Scene display on Beo5,
then press Cinema to bring up the Cinema
display on Beo5. (Beo4: Press LIST repeatedly to
display FORMAT).
> Press Cinema to switch between Home cinema
mode and ordinary TV mode. (Beo4: Press 0).
> Press
to leave the function. (Beo4: Press
EXIT).
1