Adjusting The Depth Of The Table Tray; Locking The Table Tray; Swing Away Table - Invacare Rea Clematis Pro User Manual

Manual wheelchair passive
Hide thumbs Also See for Rea Clematis Pro:
Table of Contents

Advertisement

Rea® Clematis® Pro
CAUTION!
Risk of discomfort / minor bruises
– Make sure that the elbows of the user
are placed on the table when pushing the
wheelchair. If the elbows protrudes from the
table while pushing the wheelchair, there is a
risk of discomfort or minor bruises.
The table tray can be adjusted both in depth and width, the
following sections will show the different possibilities.

4.6.1 Adjusting the depth of the table tray

1.
Open the safety lock for the depth adjustment A.
2.
Adjust the table holders B forwards or backwards to
adjust to the required depth.
3.
Close the table lock A again in order to lock the depth
position.
CAUTION!
Risk of discomfort / insecurity
The table is not in a fixed position.
– Make sure to engage the table lock again after
adjusting the depth of the table.
20
A
A
CAUTION!
Risk of discomfort
– When adjusting the depth of the table, make
sure not to squeeze the stomach of the user.

4.6.2 Locking the table tray

WARNING!
Risk of injury
The user is locked in a fixed position and can
not be removed from the wheelchair without
unlocking the table.
– The use of locking device for table tray must be
prescribed by authorized personnel.
A
1. Place the locking pin A in the table attachment.
2. Press the locking pin A inwards to unlock the table B.
Keep pressing the locking pin inwards in order to
keep the table in an unlocked position .
3. Release the locking pin A to lock the position of the
table C.

4.6.3 Swing away table

WARNING!
Risk of injury / bruises
– Take care not to hit the user whilst swinging
the table.
WARNING!
Risk of table tipping forwards
– Do not adjust the depth of the table too much
forwards due to the risk of tipping the table
when adding weight on it.
C
B
1653395-C

Advertisement

Table of Contents
loading

Table of Contents