Disposal; Materials; Consumables; Packaging - Abicor Binzel MT 452 W Operating Instructions Manual

MT/AUT/AUT RAB

12 Disposal

12.1 Materials

12.2 Consumables

12.3 Packaging

For disposal, the local regulations, laws, provisions, standards and guidelines
must be observed. For the welding torches to be properly disposed of, it first
must be dismounted.
 See 11 Dismounting on page EN-20
This product is mainly made of metallic materials which can be molten in steel
and iron works and are thus almost infinitely recyclable. The plastic materials
used are marked in preparation for sorting and separation of the materials for
later recycling.
Oils, greases and cleaning agents must not contaminate the ground and not
enter the sewerage. These materials must be stored, transported and disposed
of in suitable containers. Please observe the relevant local regulations and
disposal instructions of the safety data sheets given by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the manufacturer
of the consumables.
ABICOR BINZEL has reduced the shipping packaging to a minimum.
Packaging materials are always selected with regard to their possible recycling
ability.
12 Disposal
EN - 21