Components; Transport; Storage - Abicor Binzel MT 452 W Operating Instructions Manual

4 Components

4 Components
• MIG/MAG welding torches equipped ready for welding including
hose assembly and central plug
Tab. 9 Components

4.1 Transport

Checking procedure
on receipt of goods
In case of damage
In case of complaints
Packaging for
returning the goods
Tab. 10 Transport

4.2 Storage

EN - 8
The MIG/MAG welding torches are delivered as complete unit ready for
welding. The standard scope of delivery includes the following components:
Order the equipment parts and parts subject to wear separately. Order data
and part numbers for the set-up and wearing parts can be found in the current
ABICOR BINZEL spare parts and wearing parts lists. The contact for
consulting and ordering can be found in the Internet at www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Check that the shipment is correct by referring to the shipping note.
Check the package and components for damage (visual inspection).
If the goods have been damaged during transport, contact the last carrier
immediately. Keep the packaging (for possible checks by the carrier).
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Physical storage conditions in a closed room:
CAUTION
Damage to property
When there is a risk of frost, any coolant present in the hoses may result in
irreparable damage.
• Remove coolant from hoses.
 See Tab. 1 Ambient temperature on page EN-4
MT/AUT/AUT RAB
• Operating instructions