Personal Safety - Panduit CP-991 Operation Manual

Automatic wire stripping and ferrule crimping press
Table of Contents

Advertisement

Available languages

Available languages

© Panduit Corp. 2018
Ampere Rating
More
Not More
Than
Than
0
6
ONLY OPERATE THE CP-991 IN A CLEAN, DRY, INDOOR ENVIRONMENT.
DO NOT EXPOSE POWER TOOLS TO RAIN OR WET CONDITIONS.
Water entering a power tool will increase the risk of electric shock.
3.3

Personal Safety

Use personal protective equipment. Safety glasses must be worn at all times
by all persons operating the CP-991.
Hearing protection is recommended to be worn during operation of tool.
1. STAY ALERT, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while operating power tools may result in serious personal injury.
2. KEEP GUARDS IN PLACE and in working order.
These safety guards should be removed only by specialized and authorized technical persons
who take care to adopt all security measures to avoid any risk of danger and injury.
3. PREVENT UNINTENTIONAL STARTING. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have the
switch on invites accidents.
PA29440A01_00 ENG
OPERATION MANUAL
Volts
100 V
240 V
Minimum Wire
Gauge of Cord
WARNING
KEEP AWAY FROM LIVE CIRCUITS:
Operating personnel must not remove covers.
Replacement of components and internal adjustments must be made by
qualified maintenance personnel.
Disconnect power cable when replacing components.
Dangerous voltages may exist even with the power cable removed.
To avoid injuries, always disconnect power and discharge circuits by
grounding before touching circuitry.
Input connection to the product must remain accessible as a disconnect
device.
DO NOT work on the product; connect or disconnect cables during periods
of lightning.
Provide wiring per national and local electrical codes.
WARNING
WARNING
Total length of cord in feet (m)
25' (7 m)
50' (15 m)
50' (15 m)
100' (30 m)
AWG
18
16
Page: 7 of 26
CP-991 / CP-992
ENGLISH
100' (30 m)
150' (46 m)
200' (61 m)
300' (92 m)
16
14
11-2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-992

Table of Contents