© Panduit Corp. 2018
PA29440A01_00 ENG
OPERATION MANUAL
Check the sleeve feeding
WARNING: Risk of injury!
Disconnect the main plug and the
compressed air before you open the front
door.
•
Unscrew the separation plate (1) using the hexagonal
wrench
•
Remove the reversing base sleeve (2)
•
Push the cable through the feeder (3) and, if
necessary, remove the crimped ferrules
Check the reversing base sleeve
•
Unscrew Allen screw (1) on the reversing base
sleeve using a hexagonal wrench and open the
reversing base sleeve
•
Remove the crimped ferrules
•
Clean the feeder channel (2) and air pressure
channel (3)
Page: 26 of 26
CP-991 / CP-992
ENGLISH
11-2018