Maintenance And Storage; Period Of Use - Uwatec ProEar 2000 Instructions For Use Manual

Mask
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Snorkeling with the ProEar 2000 - The ProEar 2000 mask can be very beneficial to snorkelers as well.
The combination of wind (often cold) and cold water is very hard on the ears, in many cases, long time
snorkeling and surfing in these conditions create bony deposits in the outer ear (exostoses) which can
affect hearing and the ability to equalize when diving. The ProEar 2000 mask is the most effective solution
against this condition. Skin Divers can dive down as deep as they like with the ProEar 2000 and by gently
blowing air through the nose and into the air tubes it makes equalizing pressure much easier. The air that
covers the ears, reduces the risk of infections caused by the cold and polluted water.

MAINTENANCE AND STORAGE

It is important to carefully rinse the ProEar 2000 mask with fresh water (and soap if possible) and dry
it well after each use, especially the tubes and ear cups. If salt builds up in the pipes, it can "lock" the
one-way valve. It can plug and block air flow to the ear cup. Please always check the free flow of air
between the mask and the ear cups before diving. Leave the mask to dry in a well-ventilated place and
out of the blazing sun. When the mask is completely dry, store it in the transport box (depending on the
mask model).
  ATTENTION
Any contact of the clear silicone skirt/strap with black rubber items, could cause browning of it.
Our masks are fabricated with phthalate free, non-toxic materials and comply to strict safety standards.

PERIOD OF USE

The lifespan/duration of use of this product cannot be defined in general. Various factors such as storage
conditions, level of care, frequency of usage and the field of application will influence the lifespan/duration
of use. Extreme usage conditions can lead to excessive damage that may result in the product being
no longer fit for use. Factors such as an aggressive environment, sharp edges, extreme temperatures or
exposure to chemicals may damage the product beyond repair. Under the following circumstances, the
product should no longer be used and should be destroyed:
Damage to the material or parts which, depending on the model, cannot be replaced and which are
crucial for safety, e.g. the silicone frame or the glasses (cracks, cuts or other)
Excessive exposure of the material to permanent sunlight or if heavy objects bend the material
When the product no longer appears to be generally safe and reliable
When the product no longer meets the technical standards (e.g., changes in legal provisions, safety
guidelines, technical requirements, or incompatibility with other products)
When the product's history and previous use is not known
When the labelling of the product no longer exists or can no longer be read.
DISPOSAL
When the day finally comes you need to replace your mask with a new SCUBAPRO mask, dispose of the
old mask in accordance with local regulations and laws.
SOURCE OF STANDARDS
BS EN 16805:2015
SOURCE OR REQUIREMENTS
www.europa.eu
FOR DECLARATION OF CONFORMITY
https://www.scubapro.eu/manuals
For authorized representatives, see end of the manual.
5

Advertisement

Table of Contents
loading

Table of Contents