Kenwood NX-3400 Service Manual page 44

Item
<PC>: PC tuning mode
<Panel>: Panel tuning mode
[Analog <PC>
Narrow] 1) Adj item: [Maximum Deviation
(Analog Narrow)]
2) Deviation meter
LPF: 15kHz/ HPF: OFF
3) Adj points: 10 points
[8TX L], [8TX C], [8TX H], [8RX/TA
L], [8RX/TA C], [8RX/TA H],
[9TX L], [9TX H],
[9RX/TA L], [9RX/TA H]
4) Press [Transmit] button.
<Panel>
1) Adj item: [An ADEV]
2) Deviation meter
*Same as above
3) Adj points: *Same as above
4) PTT : ON
6. NXDN High <PC>
Deviation 1) Adj item: [NXDN High Deviation
[NXDN (NXDN Narrow)]
Narrow] 2) Deviation meter
LPF: 3kHz/ HPF: OFF
3) Adj points: 10 points
[8TX L], [8TX C], [8TX H],
[8RX/TA L], [8RX/TA C],
[8RX/TA H], [9TX L], [9TX H],
[9RX/TA L], [9RX/TA H]
4) Press [Transmit] button.
<Panel>
1) Adj item: [Nn NDEV]
2) Deviation meter
*Same as above
3) Adj points: *Same as above
4) PTT : ON
[NXDN Very <PC>
Narrow] 1) Adj item: [NXDN High Deviation
(NXDN Very Narrow)]
2) Deviation meter
LPF: 3kHz/ HPF: OFF
3) Adj points: 10 points
[8TX L], [8TX C], [8TX H],
[8RX/TA L], [8RX/TA C],
[8RX/TA H], [9TX L], [9TX H],
[9RX/TA L], [9RX/TA H]
4) Press [Transmit] button.
<Panel>
1) Adj item: [Nv NDEV]
2) Deviation meter
*Same as above
3) Adj points: *Same as above
4) PTT : ON
1-44 (No.RA070<Rev.001>)
Condition Measurement
Deviation
meter
Oscilloscope
Deviation
meter
Oscilloscope
Adjustment
Unit Parts Method
[+], [-] Write fixed value "481" for each
adjustment point. Transmit at
each adjustment point and check
that the deviation is within the
Specifications.
Press [Apply] button for <PC>, or
[ ] button for <Panel> to store
the adjustment value.
[], []
[+], [-] Write fixed value "497" for each
adjustment point. Transmit at
each adjustment point and check
that the deviation is within the
Specifications.
Press [Apply] button for <PC>, or
[ ] button for <Panel> to store
the adjustment value.
[], []
[+], [-] Write fixed value "491" for each
adjustment point. Transmit at
each adjustment point and check
that the Analog deviation is within
the Specifications.
Press [Apply] button for <PC>, or
[ ] button for <Panel> to store
the adjustment value.
[], []
Specifications
/Remarks
2050~2150Hz
2995~3117Hz
1311~1363Hz