Kenwood NX-3400 Service Manual page 30

Function ON: "Func" appears on the sub LCD display
Button Function
[Selector] -
[] Talk Around On/Off
[] Analog/NXDN/DMR
[] Function off
[] Button/LCD check
[Side1] Function off
[Side2] Function off
[ ] High power/Low
power
[ ] Function off
[ ] Function off
[ ] Function off
[AUX Compander On/Off
(Orange)]
[PTT] Transmit
[0] to [9] Function off
and
[#], [ ]
LED indicator
Red LED Lights during transmission.
Green LED Lights when there is carrier.
LCD display in panel test mode
Battery type detect
"ALKALI": Alkaline battery pack
"LI ": Li-ion
"NIMH": Ni-MH
"SP": Other
Type
K3 type is
displayed as "K"
1-30 (No.RA070<Rev.001>)
Display
-
On: [ ] icon appears
Analog: "A"
NXDN: "N"
DMR: "D"
-
The position of the selector
knob, etc., appear.
-
-
High:[ ] icon appears
Low:[ ] icon appears
-
-
-
On: [ ] icon appears
-
-
(Power ON)
Frequency range
o
Temperature [ C] Power
Sub LCD display
Main LCD display
(After 2sec.)
An : Analog narrow mode
Aw : Analog wide 5k mode
As : Analog wide 4k mode
Nn : NXDN narrow mode
Nv : NXDN very narrow mode
D : DMR mode
Signaling
No.
Channel No.
Squelch level
(Analog mode only)