Function Buttons - Vaderstad Rapid Series Instructions Manual

5.2

Function buttons

The following settings can be made directly from the
home screen while driving. Press the button for the
function you want to access in order to change the setting
A
B
C
Figure 5.3
A. Manual seed feed
When the button is held down and shows a green
symbol, seed feed will take place without the machine
moving forward. Used when starting in a corner, for
example, or during feed checks. Standard selection
for which driving speed feed output is adjusted is
made in the basic settings menu, see "6 General
settings".
B. Lift stop
Use the lift stop when the bout markers are to be
folded without lifting the machine from the bout, e.g.
to pass a post or well. Press the button so that the
indicator shows green and lift the bout marker using
the hydraulic lever. When the obstacle has been
passed, press the button again to return to Low-lift or
full lift. The software remembers the function that
was activated prior to activating the lift stop.
C. Following harrow
The button is only visible when hydraulic following
harrow is selected, see "8 Configuration". The button
opens the menu for hydraulic following harrow
settings, see "6.6 Hydraulic following harrow". This
selection should be made under the general settings if
the hydraulic following harrow is to be used, "6.2
General settings".
903099-en-gb; 19.01.2021
D
E
F
G
D. Bout marker switching
During normal driving, automatic bout marker
switching is used. This means that the bout markers
are switched at the completion of each bout.
Press Bout marker switching to select automatic or
manual bout marker switching. The Position bout
marker icon shows which bout marker is active.
Green Bout marker switching = automatic bout
marker switching. The bout marker switches
automatically when the machine is raised and lowered.
By pressing Position bout marker, the bout marker
can be advanced one step.
White Bout marker switching = manual bout marker
switching. Select bout marker by pressing Position
bout marker . The following selections are possible:
Both bout markers in – Left out – Right out – Both
out.
The bout markers are always folded in when
the machine is lifted, regardless of the
indication on the home screen. This is also
the case if the terminal is switched off.
The home screen
Automatic bout marker
switching
Position bout marker
9