Electric Shock Hazard - Grundig GDT 2561 X User Instructions

Hide thumbs Also See for GDT 2561 X:
Table of Contents

Advertisement

Risk of death, risk of poisoning
DANGER: Fire hazard!
- The waste oil from the oil filter
can ignite. Clean the oil filter at
least once every 3 months. Never
use the device without the oil fil-
ter.
- The waste oil from the oil fil-
ter can ignite. Never leave an
open flame (e.g. for flambe food)
when working near the device The
appliance can be installed near
a solid fuel heater (e.g., wood
or coal) only if it has a casing
which cannot be removed. Sparks
should not spread.
- Overheated oil and fat ig-
nite easily. Overheated oil and
fat should not be left unattend-
ed. Never try to extinguish fire
A
with water. Turn off the cooker.
Extinguish the flames slowly us-
ing a case, a fire blanket or a sim-
ilar material.
- Gas cookers with no pot on
them can create high tempera-
ture during use. A ventilation de-
vice placed above the cooker can
be deteriorated or burnt because
of that. Use gas cookers only with
a pot on top.
- Using more gas cookers si-
multaneously can create high
temperature. A ventilation device
placed above the cooker can be
deteriorated or burnt because of
that. Do not use two gas cook-
ers simultaneously more than
15 minutes with a large flame. A
large hob exceeding 5 kW (Wok)
has the same power as two gas
hobs

2.2 Electric shock hazard

DANGER:
- A faulty device can cause elec-
tric shock. Never open a faulty de-
vice. Pull out the plug and stop the
circuit breaker. See CUSTOMERS
SERVICE.
- Inappropriate repairs present
risks. The repairing and replacing
B
of damaged power cables must
be performed by a Customers
Service technician trained by us.
Should the device not operate
appropriately, unplug the supply
plug and stop the circuit breaker.
See CUSTOMERS SERVICE.
- The water outlet of the device
can cause electric shock. Do not
use high pressure or steam appli-
ances.
2.3 Danger of bodily injury!
DANGER:
• During installation, there is a
risk of injury because of the sharp
edges. Always use protective
A
gloves during the device installa-
tion.
• All screws and safety caps
must be fitted according to the
description in the User Manual,
because of the risk of the device
falling.
EN
7

Advertisement

Table of Contents
loading

Table of Contents