Using The Product - Grundig GDT 2561 X User Instructions

Using the product

9.1 Toggle switch spd 3
If you want to operate the ap-
pliance on speed 1, move the
switch upwards.
If you want to operate the ap-
pliance on speed 2, move the
switch downwards.
If you want to operate the appli-
ance on speed 3, move the first
and second speed in position 0,
and, for the third position, move
the switch downwards.
Move the switch in the lamp po-
sition to turn on the appliance
light
9.2 Using 3 SPD Digital
Products
1. Press this button to turn on the appliance.
The product will operate at speed level 1,
when this button is pressed.
2. The product will operate at speed level 2,
when this button is pressed.
3. By exploring the display, you may follow
which speed the product operates at on it.
4. The product will operate at speed level 3,
when this button is pressed.
5. Press this button to switch the lamp on and
off.
16
6. By pressing and holding any engine operating
button for more than 2 seconds, a 15 minutes
timer function will be initiated. A signal will
be displayed as soon as the chronometer
starts, and the engine will automatically stop
after 15 minutes.
9.2.1 Cleaning time for the
metal filter:
Filters must be cleaned when the signal „C" is
displayed on the screen or (depending on the
use) after 2 or 3 weeks. In order to clear the
"C" signal, after the filters have been cleaned
and replaced, press and hold the button (
more than 3 seconds (when the device is turned
off). The letter "E" will appear on the screen,
and the appliance will operate normally. If oper-
ations are necessary before clearing the letter
"C", then the active engine speed will appear for
1 second when you press the (
then the engine will resume functioning.
C
The "C" symbol will be displayed
after 60 hours of functioning.
) for
) button and