Installation Scheme - Grundig GDT 2561 X User Instructions

Installing the appliance

8.1 Installation scheme

8.1.1 Drilling the hanging holes
Paste the installation template provided with
the product on the surface where the product is
to be installed.
Drill holes with the diameter of 04 mm on the
points marked A, B, C, D on the arrangement
scheme (Fig. 9).
Tighten the exhaust vent of the specified tube
in the installation template to the given dimen-
sions.
A
MOUNTING TEMPLATE SCALE 1:1
MONTAGESCHABLONE MAßSTAB 1:1
SAGOMA DI MONTAGGIO RELAZIONE 1:1
ESTAMPA DE MONTAJE ESCALA 1:1
GABARIT POUR MONTAGE ECHELLE 1:1
SZABLON MONTAŻOWY SKALA 1:1
ASENNUSSAPLUUNA M1:1
A,B,C,D = Ø4
B
Fig. 9
The dimensions provided in the
C
images are for representation
purpose. Carefully Follow the in-
stallation template offered to you
with the purchased product.
The equipment will be installed on the housing
in points A, B, C, D using the 4 x 40 screws sup-
plied with the equipment. Do not rub the front
panel against the housing case when the sliding
set is moving (Fig. 10).
500
456
C
248
CUT-OUT LINE ON CUPBOARD FOR AIR EXIT
AUSSCHNITT IM SCHRANK FÜR LUFTAUSTRITT
LINEA DI TAGLIO PER USCITA ARIA
RECORTE DEL ARMARIO PARA LA SALIDA DE AIRE
LIGNE A COUPER POUR LA SORTIE D'AIR
ZAZNACZYĆ W SZAFCE OTWÓR POD WYLOT POWIETRZA
D
1
2
3
Fig. 10
If necessary, insert the 0150/120 mm tube
adapter at the tube outlet (Fig. 11).
Fig. 11
The 0150/120mm exhaust tube
C
adapter is sold optionally. Contact
your dealer in order to purchase
it.
Perform the connection for the air exhaust for
this product.
EN
1
15