AVANT A21506 Operator's Manual For Attachment
  1. Manuals
  2. Brands
  3. AVANT Manuals
  4. Construction Equipment
  5. A21506
  6. Operator's manual for attachment

AVANT A21506 Operator's Manual For Attachment

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
English
Feed mover screw 2018 1
Operator's Manual for Attachment
Feed mover screw
Product number
A21506
www.avanttecno.com
A430008 2018 1 EN 2011-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A21506 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AVANT A21506

Summary of Contents for AVANT A21506

  • Page 1 English Feed mover screw 2018 1 Operator's Manual for Attachment Feed mover screw Product number A21506 www.avanttecno.com A430008 2018 1 EN 2011-...
  • Page 2 Feed mover screw 2018 1...

  • Page 3: Table Of Contents

    Feed mover screw 2018 1 CONTENTS 1. FOREWORD ............................4 Warning symbols used in this manual ..........................5 2. DESIGNED PURPOSE OF USE ......................6 3. SAFETY INSTRUCTIONS FOR USING THE FEED MOVER SCREW ..........7 4. TECHNICAL SPECIFICATIONS ......................10 Safety labels and main components of the attachment.................. 10 5.

  • Page 4: Foreword

    If you sell or transfer the equipment, be sure to hand over this manual to the new owner. If the manual is lost or damaged, you can request a new one from your Avant dealer or from the manufacturer.

  • Page 5: Warning Symbols Used In This Manual

    5 (26) Warning symbols used in this manual The following warning symbols are used throughout this manual. They indicate factors that must be taken into account to reduce the risk of personal injury or damage to property: WARNING: SAFETY ALERT SYMBOL This symbol means: “Warning, be alert! Your safety is involved!”...

  • Page 6: Designed Purpose Of Use

    2. Designed purpose of use The AVANT feed mover screw is an attachment suitable for use with AVANT multi purpose loaders shown in Table 1. The attachment is intended to be used only on even surfaces to move shredded feed. Other applications are prohibited.

  • Page 7: Safety Instructions For Using The Feed Mover Screw

    7 (26) 3. Safety instructions for using the feed mover screw Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly powerful and improper or careless use or maintenance may cause serious personal injury or property damage.
  • Page 8 8 (26)  Make sure that the loader is equipped with necessary safety components, and that they are in working condition. Seat belt must be used. If there are specific hazards related to the operating area, use appropriate safety equipment. WARNING ...
  • Page 9 9 (26) Remember to wear proper personal protective equipment:  The noise level at the driver's seat may exceed 85 dB(A) depending on loader model and operating cycle. Extended exposure to loud noise can cause hearing impairment. Wear hearing protection while working with the loader. ...

  • Page 10: Technical Specifications

    Make sure all warning decals are readable. The warning labels contain important safety information and they help to identify and remember the hazards related to the equipment. Replace damaged or missing warning labels with new ones. WARNING Attachment identification plate A21506 A46771 A46772 A46804 To apply a new label: Clean the surface thoroughly to remove all grease.
  • Page 11 Hazard of entanglement, keep a safe 3 A46804 distance to rotating components. 4 A21506 Attachment identification plate Table 4 - Feed mover screw - Main components 1 Mover screw 2 Hydraulic motor 3 Frame...

  • Page 12: Assembling The Attachment

    Do not stay in the area between the attachment and the loader. Mount the attachment only on level surface. WARNING Never move or lift an attachment that has not been locked. Avant quick coupling system: Step 1:  Lift the quick attach plate locking pins up and turn them backwards into the slot so that they are locked in the upper position.

  • Page 13: Connecting And Disconnecting Hydraulic Hoses

    5.1 Connecting and disconnecting hydraulic hoses On Avant loaders the hydraulic hoses are connected using the multi connector system. If you have an Avant 300-700 series loader with the conventional quick couplers and wish to change to the multi connector system, contact your Avant dealer or service point for instructions or installation services.
  • Page 14 14 (26) Keep all fittings as clean as possible; use the protective caps on both the attachment and the loader. Dirt, ice, etc. may make using the fittings significantly more difficult. Never leave the hoses hanging on the ground; place the couplings onto the holder on the attachment.

  • Page 15: Operating The Attachment

    15 (26) 6. Operating the attachment Check the attachment and the operating environment once more before starting to work, and that all obstacles have been removed from the operating area. Quick inspection of the equipment and the operating area before use are parts of ensuring safety and the best performance of the equipment.

  • Page 16: Checks Before Use

    16 (26) 6.1 Checks before use Check that all obstacles have been removed from the working area before operation. Remember  correct working methods and avoid unnecessary descending from the loader. Use only when all pins are locked and secured in place. ...

  • Page 17: Use

    17 (26) 6.2 Use Before starting to work: Read all safety instructions. Using the feed mover screw: Set the attachment to working position. The feed mover screw works in the most efficient way, when it is kept at a slightly tilted position, as shown in figure below. When a suitable position is adjusted, lift the loader boom by operating the boom control lever only longitudinally.

  • Page 18: Avoiding And Clearing Blockages

    18 (26) Boom floating (optional equipment on some loader models) If your loader is equipped with the boom floating option, it is recommended to switch it on. Floating allows the blade to follow the surface of the ground more effectively, improving its performance. Note that the loader can stop unexpectedly when hitting an obstacle.

  • Page 19: Storing The Attachment

    19 (26) 6.5 Storing the attachment Uncouple and store the attachment on level ground. The best way to store the attachment is a place where it is protected from direct sunlight, rain, and extreme temperatures.  Avoid leaving the attachment laying directly on the ground. Place it on blocks of wood or on a pallet, for example.

  • Page 20: Maintenance And Service

    Finding any fault means that the hydraulic hose or component must be replaced and the equipment must not be used until it is repaired. Spare parts are available from your nearest AVANT retailer or authorised service point. Leave the repair work to professional service technicians, if you don’t have adequate knowledge and...

  • Page 21: Cleaning The Attachment

    21 (26) 7.2 Cleaning the attachment Clean the attachment regularly to prevent accumulation of dirt which is more difficult to remove. A pressure washer and mild detergent can be used for cleaning. Do not use strong solvents, and do not spray directly at the hydraulic components, or at the labels on the attachment.

  • Page 22: Stop Valve

    22 (26) 7.6 Stop valve Attached to the hydraulic motor of the feed mover screw is a valve, which stops the screw in cases of blockages to avoid damages to the screw. The valve has a pre-set pressure limit setting to both operating directions.

  • Page 23: Warranty Terms

    23 (26) 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it manufactures. The warranty covers repair costs as follows:  Work costs are covered, if the repair is not performed at the factory.
  • Page 24 Mallit / Modeller / Models: Avant Hydraulitoiminen rehunsiirtoruuvi; Avant-kuormaajan työlaite Hydraulisk foderskruv; arbetsredskap för Avant lastare A21506 Hydraulic Feed mover screw; attachment for Avant loaders 28.5.2018 Ylöjärvi, Finland Risto Käkelä, Toimitusjohtaja / Verkställande direktör / Managing Director Original language version...

Table of Contents