Page 1
General, light material and levelling buckets 2014 1 Operator’s manual for Attachment Bucket General buckets, light material buckets, and levelling buckets for Avant loaders Product numbers: General bucket: A33032 A21044 A1315 A21312 A21043 A21168 A34341 Light material A33028 A33100 A32755...
Warranty terms ........................... 10 1. Foreword Avant Tecno Oy would like to thank you for your purchase of this attachment for your Avant loader. It has been designed and manufactured on the basis of years of experience on product development and manufacturing.
Table 1. The other bucket types available for Avant loader make working with the loader easier or more versatile. For example, the High tip bucket is an excellent all-round bucket and especially useful when piling material frequently.
4(10) 3. Important safety instructions Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly powerful and improper or careless use or maintenance may cause serious personal injury or property damage. Due to this, you should carefully familiarise yourself with the manuals of both the loader and the attachment before starting operation.
Total width, mm (A): 1050 1100 1280 1400 1650 Base length, mm (B): Height, mm (C): Weight, kg: Volume: Suitable AVANT loader: See Table 1 Table 3 – Light material bucket - technical data Product number A33028 A33100 A32755 A33993 A32753 A32744...
6(10) 4.1. Decals and markings Listed below are the labels and markings, which must be visible on the equipment. Replace the warning labels, if they have become unclear or if they have detached completely. New labels are available via your retailer or contact information provided on the cover.
Page 7
7(10) 300-700 series 200 series loaders: Step 1: loaders: • Lift the quick attach plate locking pin / locking pins up and turn them backwards into the slot so that they are locked in the upper position. • If your loader is equipped with a hydraulic attachment locking system, see additional instructions about the use of the locking system from the relevant manuals.
8(10) 6. Instructions for use Check the attachment and the operating area once more before starting to work. Quick inspection of the attachment before beginning work is part of ensuring safety and the best performance of the equipment. Remember correct working methods and avoid leaving the driver’s seat unnecessarily. Practise the use of the attachment and the controls of the loader in an open and safe area.
9(10) Material handling: Use maximum load indicated in the diagram of the operator’s manual of the loader as a guideline. Remember that the actual load carrying capacity varies according to operating conditions, especially unevenness of operating area has a great effect. Be especially careful when the load sensor indicator is activated.
When welding, only methods and additives suited for steel used in bucket must be used. For more information about repairs contact your nearest service point. 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it manufactures. The warranty covers repair costs as follows: •...
Need help?
Do you have a question about the A33032 and is the answer not in the manual?
Questions and answers