Tcp/Ip Printing In Windows 2000 And Windows Xp - Axis 5600+ User Manual

38

TCP/IP printing in Windows 2000 and Windows XP

Follow the instructions below to use the standard Windows method
(LPR) for adding a printer in Windows 2000/XP:
Go to Start | (Settings) | Printers (and Faxes) and click the Add (a)
Printer icon to start the Add Printer Wizard. Select the appropriate
radio button:
Local printer - If you are connecting directly to the print server
•
(peer-to-peer printing), select Local Printer.
Make sure that you don't check the Automatically detect and
install my Plug and Play printer checkbox! Click Next.
Click the Create a new port radio button and select Standard
TCP/IP Port from the list.
Follow the Add Standard TCP/IP Port Wizard to complete the
installation (You need to know the IP address of your print server
and the model of the connected printer to install an appropriate
driver).
Network printer - If your print server has already been installed
•
by the administrator on another computer, select Network
printer and click Next. Follow the instructions in the Add Printer
Wizard to complete the installation.
Note:
The standard print method is LPR. If you wish to print using Raw TCP,
right-click the installed printer in Start | (Settings) | Printers (and
Faxes). Select Properties and click Port =>Configure Port button.
Click the Raw radio button. The default port number is 9100 for LPT1.
Click OK to finish.
Next, set the HPJetadmin parameter to Yes in the print servers web
interface: admin =>General Settings=>HP JetAdmin Support =>
Yes. Click OK.
You are now ready to print using Raw TCP.
AXIS 5600+ User's Manual