Management & Configuration - Axis 5600+ User Manual

AXIS 5600+ User's Manual
Management & Configuration
Configuration
Overview
The management and configuration tools that are supported by the
AXIS 5600+ allows you to:
• Change the print server parameters, i.e. editing the
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the AXIS 5600+
• Upgrade the AXIS 5600+ firmware (Refer to Section Upgrading
the Software, on page 171)
The method you should use to manage and configure your AXIS
5600+ is depending on the operating system protocols of your
network. The table below displays which method to use for each
supported environment.
Operating System Protocols
TCP/IP
(UNIX,
Windows 95/98/NT/2000/XP,
Windows 3.1/WfW,
NetWare Pure IP, OS/2)
NetBIOS/NetBEUI
(Windows 95/98/NT/2000,
Windows 3.1/WfW, OS/2)
IPX/SPX (NetWare)
AppleTalk using TCP/IP
Configuration/Management methods
• Web Browser - See page 120
• AXIS ThinWizard - See page 127
• FTP - See page 137
• telnet - See page 140
• SNMP - See page 143
• AXIS NetPilot - See page 130
• AXIS NetPilot - See page 130
• Web browser - See page 120
119
config
file