AXIS 5600+ User's Manual
Network Speed
ISO-8859-1 is the default character set.
• For Japanese, SHIFT_JIS or UTF-8 should be used.
SHIFT_JIS is default for Japanese.
• Other languages should use UTF-8 or ISO-8859-1.
With the Network Speed parameter you can manually specify the
speed at which you will send and receive network packages. You can
change the Network Speed setting to correspond to the typ of
network you are using (10 or 100 mbit).
To change the Network Speed, log in to the print server's internal web
page and click Admin | General Settings | General. From here you
have the option of setting the network speed to:
AUTO_SENSE
(default value)
10_HALF__DX
10_FULL-DX
100_HALF_DX
100_FULL-DX
The default Network Speed value is AUTO_SENSE. This option is the
correct option for the majority of users. If you choose a faulty
Network Speed option for your network, you may loose contact with
the print server. In order to reset the Network Speed parameter to
AUTO_SENSE, you will have to perform a factory default on the print
server.
The print server detects which speed is
optimal for each network package you
transfer.
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
169