Axis 5600+ User Manual page 77

AXIS 5600+ User's Manual
Install a printer with
AXIS IPP Gateway
Configuration Snapin
1. Use an AXIS 5600+ and connect a printer to whatever port you
want.
2. Connect the print server to the network.
3. Connect the power supply.
4. Start both the printers and the print server.
5. Log in as Admin.
6. Use a web browser and the local host URL to login into iManager
on your NetWare server.
7. Open your browser to the following URL:
https://<IP address of NW server>:2200/eMFrame/iManager.html
You have to authenticate.
8. Click on iPrint Management on the left pane.
9. Click on Create Printer.
10. Choose a name of your choice for the printer
11. Choose the context where the printer will be installed.
12. Browse for the NDPS Manager and select it.
13. In the Gateway Type drop-down list, choose the Axis IPP Gateway
Configuration. Press Next.
14. In the Printer URL, you may choose either the IPP version 1.0
format,:
http://<IP address of your print server>:631/lptx
or the IPP version 1.1:
ipp://<IP address of your print server>/lptx
where x is the port number. Replace lptx with COM, if using the
COM port. Click Next.
15. Select default drivers for your printer. Click Next and OK.
77