Axis 5600+ User Manual page 173

AXIS 5600+ User's Manual
Upgrading using
AXIS ThinWizard
Upgrading using
AXIS ThinWizard
Upgrading over the
Network using FTP
AXIS ThinWizard 3.0 is a tool that enables batch upgrading of several
print servers and can be used for upgrading the print server's
firmware in TCP/IP networks.
You must assign an IP address to the print server, as described earlier
in this manual, before you can use this upgrading method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
1. Click the Manage Network button in the AXIS ThinWizard main
menu.
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network group.
3. All AXIS servers included in the network group appear. Click the
Firmware button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to Using AXIS ThinWizard for Print Server Management, on page
127, for more information about AXIS ThinWizard.
To upgrade over the network using FTP you will need the file with the
new print server software. The name of this file is in the form
product_version.bin
6.20. You can use any of the previously mentioned methods to obtain
the new file.
You must assign the AXIS 5600+ with an IP address, as described in
Assigning an IP address, on page 22, before you can use this
upgrading method.
Follow the procedures below to upgrade the AXIS 5600+:
, e.g.
5600+_634.bin
for software release