Switches & Connectors - Axis 243Q Blade User Manual

AXIS 243Q Blade - Product description
8
Switches & connectors
DIP switches - A corresponding line termination switch is supplied for each video input.
Units are shipped with line termination enabled for each video input; that is, with the DIP
switch set in the down position.
Control Button - Press this button to restore the factory default settings, as described in
Resetting to the factory default settings, on page 47, or to install using AXIS Internet
Dynamic DNS Service (see the Installation Guide).
Video Input - Each video input is connected using a coax/BNC connector. Physical
connections made using 75 ohm coaxial video cable have a recommended maximum
length of 250 meters (800 feet).