Port Status - Axis 243Q Blade User Manual

6. Adjust the Object size, History and Sensitivity profile sliders (see table below for
details). Any detected motion within an active window is then indicated by red
peaks in the Activity window (the active window has a red frame).
7. Click Save.
If there are parts of the Include window that you wish to exclude, click the
Configure Excluded Windows radio button and perform steps 1-6 above.
Click Save.
Please use the online help
Parameter Size
Object
High Only very large objects
trigger motion detection
Low Even very small objects
trigger motion detection
Default values Low
Examples:
Avoid triggering on small objects in the image by selecting a high size level.
•
To trigger motion detection as long as there is activity in the area, select a high history level.
•
To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is
•
recommended.

Port status

Under Event Configuration > Port Status, there is a list that shows the status for the
connected inputs and outputs of the AXIS 243Q Blade. This is for the benefit of an
operator, who cannot access the System Options section.
Example:
If the Normal state for a e.g. a pushbutton connected to an input is set to Open circuit, as long as the but-
ton is not pushed, the state is inactive. If the button is pushed, the state of the input changes to active.
for descriptions of each available option.
History
An object that appears in the region will
trigger the motion detection for a long
period
An object that appears in the region will
trigger motion detection for only a very
short period
Medium to High
AXIS 243Q Blade - Event configuration
Sensitivity
Ordinary colored objects against ordinary
backgrounds will trigger the motion
detection
Only very bright objects against a dark
background will trigger motion detection
Medium to High
27