Emerson MIDWAY ECO LED Owner's Manual page 7

3. Ceiling Fan Assembly
3.7
Make sure the grommet is properly installed in the coupler
cover then slide the coupler cover on the downrod until it
rests on the fan assembly.
Reinstall the three #8-32 x .75" flat head screws, removed
in Step 3.6, through the coupler cover and into the fan
assembly (Figure 7).
A spare #8-32 x .75" flat head screw is supplied in the
loose parts bag, if required.
3.8
Place the ceiling cover over the downrod.
Be sure both the ceiling cover and the coupler cover are
oriented correctly (Figure 8).
(Continued)
GROMMET
COUPLER
COVER
Figure 7
COUPLER
COVER
Figure 8
7
DOWNROD
#8-32 x .75" FLAT
HEAD SCREWS (3)
FAN ASSEMBLY
DOWNROD
CEILING
COVER
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF955L