About; Resetting To The Factory Default Settings - Axis Q6032-E User Manual

Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,
reset the unit to its factory default settings. A backup file may be of use to return the unit to its latest configuration.
Axis strongly recommends that you do not use this function unless you understand the consequences. Note that Axis
support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config - this function is for the advanced user with experience of Axis network camera configuration. All parameters
can be set and modified from this page. Help is available from the standard help pages.

About

Here you can find basic information about your network camera. You can also view third party software licenses.

Resetting to the Factory Default Settings

To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described
in Maintenance, on page 35) or use the Control button on the side of the camera (see page 5) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Remove the dome cover from the camera unit, this will automatically disconnect power from the camera.
2. Press and hold the Control button and the Power button, see illustration on page 5.
3. Keep the both buttons pressed until the Status indicator LED flashes amber (this may take up to 15 seconds).
4. Release the Control button. When the Status indicator LED displays green (which can take up to 1 minute) the
process is complete and the camera has been reset.
Note:
The Status indicator LED will display green for 10 seconds only. After that it will be unlit. Refer to the Status LED table on
page 6 for more information.
5. Release the Power button and replace the dome cover, this will automatically reconnect power to the camera.
6. Re-assign the IP address.
7. It is also possible to reset parameters to the original factory default settings via the web interface. For more
information, please see the online help or the user's manual.
For other methods of setting the IP address, refer to the product's Installation Guide that accompanies the product, or
download a copy from www.axis.com
37
AXIS Q6032-E - About