Storage; Storage Device; Maintenance - Axis Q6032-E User Manual

SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices. Depending on the level of
security required, select the version of SNMP to use. The three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community name can be specified as a password for read or read/write access
to all supported SNMP objects. The community is the the group of network devices using SNMP.
• SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.
UPnP™
The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically
detected by operating systems and clients that support this protocol.
RTP/H.264
These settings are the port range, IP address, port number, and Time-To-Live value to use for the video stream(s) in multicast
H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please
see the online help .
Bonjour
The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this.

Storage

The Disk Management window is used to set up and manage local storage. it is used to connect memory cards for recording
video, monitoring a disk's status, enabling automatic cleanup and preventing the memory card from being overwritten.

Storage Device

Storage device is used to identify and monitor the status of the SD card. it shows the size of the memory card and how much
free space is available for storage. It is also used to mount and format SD cards for local storage.
Device Settings
Device settings is used to configure removal of recorded video. Automatic disk cleanup can be enabled and set up according to
a schedule, and an SD card can be locked to prevent storage removal.

Maintenance

Restart - the camera is restarted without changing any settings.
•
Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not reset
•
are:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
Default - the default button should be used with caution. Pressing this returns the camera's settings to the factory
•
default values (including the IP address).
Upgrade Server - See Updating the Firmware, on page 38.
AXIS Q6032-E - System Options
35