Advertisement
3.
Press the 'R' button on the gauge once to turn on the REFOS laser. Ensure the laser is
positioned correctly and then press the 'R' button again to take the reading. The reading
will appear on the built-in screen of the DLHS gauge.
Hold the
button for at least 1 second to turn off the DLHS gauge.
4.7
DLHS app
The ABT8000 comes with an S42 CAT android phone which has the DLHS application pre-
installed, set up and ready for use. The app offers exclusive features for the DLHS that are only
available while being connected such as the ability to log readings from the gauge, change stagger
measurement modes (nominal gauge, measured gauge), e-mail results etc.
4.8
Using the App
The DLHS device will transmit a Wi-Fi signal when turned on. The android device with the DLHS
app installed has the 'Connect' button to connect automatically to the device as shown in Figure
8 (an initial pairing via accessing the Wi-Fi settings on the android device is required).
While connected to the DLHS app, pressing the physical buttons on the DLHS device will
automatically update the text fields in the app screen with readings. The user also has the option
to control the DLSH directly via the app.
∗
The e-mail functionality is only available once the user has set up the mobile device with an
existing email address.
Figure 7 – REFOS laser unit
∗
9
Advertisement
